Mile2 Canada
  • Back
  • Certifications
    • Certification roadmap
    • CyberSecurity Foundations for Beginners
    • For Working IT Professionals
    • For Penetration Testers and Ethical Hackers
    • For Managers and IT leads
  • Training
    • Live, Instructor-led
    • Self-Study Kits
    • Exam Prep Combos
  • About Us
  • Resources
  • Contact us
Login
CyberDefenceTech

What Is a Rootkit and How Do You Detect and Remove One?

by Mile2 Canada4 minutes read November 20, 2026
  • Share:
What Is a Rootkit and How Do You Detect and Remove One? — photo by Mikhail Nilov via Pexels

A rootkit does one thing well. It hides. By the time your team notices slow servers or odd network traffic, an attacker with a rootkit has owned the machine for weeks. The malware sits below your antivirus, feeds it false readings, and survives most clean-up attempts. In September 2025, the Canadian Centre for Cyber Security warned organizations across Canada about this exact kind of threat buried inside Cisco firewall appliances.

You pay for this invisibility with time. A rootkit gives an intruder a hidden door into your systems long after the first break-in. It masks files, processes, and connections. It switches off the tools you rely on. Knowing how a rootkit works is the first step toward finding one before it does lasting damage.

What is a rootkit?

A rootkit is a set of tools built to grant hidden, high-level access to a system. The Canadian Centre for Cyber Security describes it as malware which grants hidden access to networks, systems, or devices by masking itself as a legitimate operating system component. The name comes from “root,” the top-level administrator account on Unix and Linux systems. Once a rootkit holds root, it controls what the operating system reports back to you. It decides which files you see and which processes appear in your task list.

Where rootkits hide

Rootkits work at different depths, and depth decides how dangerous one becomes. User-mode rootkits run inside normal applications and prove the easiest to find. Kernel-mode rootkits load into the core of the operating system, where they rewrite how the system handles files and memory. Bootkits infect the boot process, so they load before the operating system and your security software wake up. The deepest threats live in firmware. CCCS notes a rootkit often hides deep in operating system components or firmware to avoid detection. A firmware rootkit survives a full disk wipe and a fresh operating system install, because it lives on a chip, not on your drive.

Why rootkits are hard to detect

Antivirus software trusts the operating system to answer honestly. A kernel rootkit breaks this trust. When your scanner asks for a list of running processes, the rootkit removes its own entry before the answer reaches you. Logs look clean. File listings look normal. Network tools report nothing unusual, even while the malware sends your data out. This is why signature-based tools alone miss rootkits. You need behaviour-based detection and checks run from outside the suspect system.

A Canadian wake-up call

The Cisco firewall threat shows how real this problem is for Canadian teams. On 25 September 2025, the Cyber Centre reported highly sophisticated malware targeting Cisco ASA 5500-X Series devices, appliances it called commonly used by organizations across Canada. The attackers chained three flaws, tracked as CVE-2025-20333, CVE-2025-20362, and CVE-2025-20363, to seize control and plant malware with firmware-level persistence. Rajiv Gupta, head of the Canadian Centre for Cyber Security, put it plainly: early action is the best defence to protect your systems and safeguard your information. A rootkit at the firewall edge watches every connection into your network.

How to detect a rootkit

Detection starts with refusing to trust the infected machine to report on itself. Boot from clean external media and scan the drive offline, so the rootkit never runs. Compare file hashes against known-good baselines to spot quiet changes. Watch your network from a separate device, because outbound traffic the host hides still crosses the wire. CCCS lists warning signs worth your attention: security software switching off on its own, unknown programs running, heavy disk or network activity while a machine sits idle, and crashes with no clear cause. Train your analysts to treat these as leads, not annoyances.

How to remove a rootkit

Removal is blunt work. For most rootkits, you wipe the drive and reinstall the operating system from trusted media, a step CCCS recommends directly. Pair this with hardened operating systems and applications so the same hole does not reopen. Restore data only from clean backups made before the infection, and scan those backups first. Follow the 3-2-1 backup rule the Cyber Centre promotes: three copies, two types of media, one kept offsite. Reset passwords, revoke active sessions and tokens, and re-enrol multi-factor authentication, because the attacker likely stole credentials while hidden. Firmware rootkits demand more. You reflash the firmware or replace the hardware outright, since a disk wipe leaves them in place.

Build the skills to find what hides

Rootkit defence rests on skilled people, not one product. Analysts need to read system behaviour, question clean-looking logs, and run forensics during a live incident. Mile2 Canada builds these skills through role-based, hands-on training. The Certified Cybersecurity Analyst (C)CSA) course teaches the monitoring and detection work rootkits try to defeat. The Certified Incident Handling Engineer (C)IHE) path covers containment, removal, and recovery when a host turns hostile. For the offensive view, the Certified Professional Ethical Hacker (C)PEH) program shows how attackers gain and hold root, so you learn to hunt the same tracks. Map this training to CCCS guidance, ITSG-33 controls, and the CCCS Baseline Controls, and your team shifts from reacting to hunting.

  • Share:
Previous
QR Code Phishing (Quishing): How Malicious QR Codes Target Canadian Organizations
4 minutes read

Got Questions? Talk to us

Name(Required)
This field is hidden when viewing the form

Recent Posts

  • What Is a Rootkit and How Do You Detect and Remove One?
  • QR Code Phishing (Quishing): How Malicious QR Codes Target Canadian Organizations
  • SIM Swapping: How Attackers Hijack Your Phone Number and How to Stop It
  • What Is a Web Application Firewall (WAF) and How Does It Work?
  • Smishing and Vishing: How Text and Voice Phishing Scams Target Canadian Organizations

Share this

Newsletter Subscription

Get practical insights, training updates, and career tips delivered straight to your inbox.

loader
About Mile2

Mile2 develops cyber security certifications that meet the evolving needs of the Information Systems sector. Read more…

Facebook-f Linkedin Youtube
Courses
  • Courses
  • Certifications
  • Blogs
  • CyberSecurity Resources
Useful Links
  • Code of Ethics
  • Legal & Trademark
  • Privacy Statement
Contact Us
  • (613) 416-8898
  • info@mile2.ca
  • 451-207 Bank Street Ottawa, ON K2P 2N2 Canada
  • Copyright © 2025 Mile2 Canada. All Rights Reserved.
HomeSearchAccount